Newport XPS - Page 251

XPS Unified Programmer’s Manual
Prototype
int PositionerCompensatedFastPCOSet(
int SocketID,
char * PositionerName,
double Start,
double Stop,
double Step
)
Input parameters
SocketID int Socket identifier gets by the
“TCP_ConnectToServer” function.
PositionerName char * Positioner name.
Start double Start position (units).
Stop double Stop position (units).
Step double Distance between two consecutive pulses (units).
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -8: Wrong object type for this command.
• -17: Parameter out of range or incorrect.
• -18: Positioner Name doesn't exist or unknown command.
• -121: Function is not allowed due to configuration disabled.
• -122: Data incorrect (wrong value, wrong format, wrong order or inexistent).
237 EDH0373En1023 — 01/18