Newport XPS Programmer's Manual

XPS Unified Programmer’s Manual
Output parameters
None.
Return (In addition to the results of “Input Tests Common to all XPS
Functions”)
• 0: No error.
• -3: String too long.
• -8: Wrong object type for this command.
• -19: Group name doesn't exist or unknown command.
• -61: Error file corrupt or file doesn't exist.
• -66: Trajectory doesn't contain any element.
• -72: Error trajectory initialization.
587 EDH0373En1023 — 01/18

Newport XPS Specifications

General

Controller Type	Multi-axis motion controller
Power Supply	24 VDC
Communication Interface	Ethernet
Programming Language	C, C++, .NET, LabVIEW
Supported Motor Types	Stepper
Operating System Compatibility	Windows
Axes	Up to 8 axes