TFE-4RV-1 Company Confidential
Troubleshooting Nokia Customer Care
Page 6-22 Copyright © 2005 Nokia Corporation Issue 2.0 Mar/2005
Company Confidential
• After the connection parameter settings have been done, the new connection so
called e.g.“BLUETOOTH COM1 JBT-9 MIN MAX” can be seen in the Priority list of pos-
sible connections. It is now important to put this connection on to the top of the list
in order to use it. This can be done with the arrow button and afterwards “Apply”
button.
Establish a Bluetooth FBUS conncetion to a phone
Below it is basicly described how to establish a BTFB connection. Depending on the
phone UI structure it can slightly differ from this description.
• Switch on the phone and enable the Bluetooth interface in the related sub-menu.
• Press “Apply” in the Phoenix “Manage Connection” menu when the “BLUETOOTH
COM1…” connection has been selected and is on the top. The green “BER TEST” LED
on the JBT-9 box frontpanel will light up. The JBT-9 box starts an inquiary of all
devices in range. First seen device will be asked for connection.
To Next Page
Loading...
