Nokia Customer Care 3 - Service Software
TFE-4/RV-1
Issue 2.0 Mar/2005 Copyright © 2005 Nokia Corporation Page 3-23
Company Confidential
Selected connection will be shown on the right hand bottom corner of the screen.
To use the selected connection, connect the phone to Phoenix with correct service tools,
make sure that it is switched on and select “Scan Product”.
When Product is found, Phoenix will load product support and when everything is ready,
name of the loaded product support module and its version will be shown on the bottom
of the screen.
Updating Flash Support Files for FPS-8* and FLS-4*
Before installation
• Install Phoenix Service SW .
To Next Page
Loading...
