Nokia Customer Care 3 - Service Software
TFE-4/RV-1
Issue 2.0 Mar/2005 Copyright © 2005 Nokia Corporation Page 3-9
Company Confidential
After the reboot components are registered and Phoenix is ready for use. Note that Phoe-
nix doesn't work, if components are not registered.
Now the installation of Phoenix Service SW is ready and it can be used after :
• installing Phone model specific Phone Data Package for Phoenix
• configuring users and connections
FLS-4S can be used right away.
FPS-8* can be used after updating Flash Update Package files to it.
Updating Phoenix installation
If you already have the Phoenix Service SW installed on your computer, sooner or later
there will be need to update it when new versions are released.
Always use the latest available versions of both the Phoenix Service SW and the Phone
Specific Data Package. Instructions can be found in phone model specific Technical Bul-
letins and Phone Data package readme.txt files (shown during installation).
To update Phoenix, you need to take exactly the same steps as when installing it for the
first time.
• Download the installation package to your computer hard disk.
To Next Page
Loading...
Need help?
General
