Nokia Customer Care 7 - Installation
Company Confidential TFE-4/RV-1
Issue 2.0 Mar/2005 Copyright © 2005 Nokia Corporation Page 7-9
Company Confidential
• Connection to a compatible car radio loudspeaker via the line-in input of the car
radio. The audio level will need to be adjusted suitably if this option is used.
Function Test
After the CarKit Phone has been installed, it needs to be checked to ensure that it is
working properly. When testing the operation of the equipment, also check that it has
been mounted so that it in no way impairs the driver during operation of the vehicle.
• To make a wireless connection between the CarKit Phone and a compatible
accessory with Bluetooth technology, ensure that the devices are within the
range necessary for Bluetooth transmission. Remember that external devices
need to be supplied with sufficient power for this feature (check the battery
pack).
Power Cable PCU-4
Technical Data
Battery voltage 12.6 V DC (10.8 - 16.0 V)
Current carrying capacity 1.5 A (standby mode 1 mA)
Transmitting power EGSM 900 3.2 mW - 2 W
DCS 1800 1.0 mW - 1 W
Figure 3: Power Cable PCU-4