TFE-4/RV-1
3 - Service Software Nokia Customer Care
Page 3-22 Copyright © 2005 Nokia Corporation Issue 2.0 Mar/2005
Company Confidential
Manual Settings
A) For FLS-4S POS Flash Device choose the following connection settings
• Media: FBUS
• COM Port: Virtual COM Port used by FLS-4 Please check this always!
(To check please go to Windows / Control Panel / FLS Virtual Port / Configuration)
B) For FPS-8 Flash Prommer choose the following connection settings:
• Media: FPS-8
• Port Num: COM Port where FPS-8 is connected
• COMBOX_DEF_MEDIA: FBUS
Choose “Finish” to complete.
If you use the Wizard, connect the tools and a phone to your PC and the wizard will
automatically try to configure the correct connection.
Activate the connection you want to use by clicking it and use up/down arrows to move
it on top of the list. Choose “Apply”. The connection is now selected and can be used
after closing the “Manage Connections” window.
To Next Page
Loading...
Need help?
General
