TFE-4/RV-1
3 - Service Software Nokia Customer Care
Page 3-14 Copyright © 2005 Nokia Corporation Issue 2.0 Mar/2005
Company Confidential
Data Package for Phoenix (Product Specific)
Before installation
• Product Data Package contains all product specific data to make the Phoenix
Service Software and tools usable with a certain phone model.
• Check that the dongle is attached to the parallel port of your computer.
• Install Phoenix Service SW.
• Download the installation package (e.g. RV_1_dp_v_2.0_mcusw03.00.exe) to
your computer (e.g. C:\TEMP).
• Close all other programs.
• Run the application file (e.g. RV-1_dp_v_2.0_mucsw03.00.exe) and follow
instructions on the screen.
Please note that very often the Phoenix Service SW and the Phone Specific Data Package
for Phoenix come in pairs, meaning that certain version of Phoenix can only be used with
certain version of Data Package. Always use the latest available versions of both. Instruc-
tions can be found in phone model specific Service Bulletins and readme.txt files of the
data packages.
Note: All the screenshots are only examples of what one can expect to see, certain
information may differ i.e. type designator or SW version etc.
Installing Phoenix data package (product specific)
Run the RV-1_dp_v_2.0_mucsw03.00.exe to start the installation.
When you choose “Next” the files needed for the installation will be extracted. Please
wait.
To Next Page
Loading...
Need help?
General
