CLI Usage
100
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
remote-max-checkpoints
Syntax remote-max-checkpoints [number]
no remote-max-checkpoints
Context config>system>rollback
Description This command configures the maximum number of rollback checkpoint files that can be
saved on a remote device.
When the maximum number of files are saved, the oldest rollback checkpoint file will actually
have an ID value one less than the configured maximum, because one rollback checkpoint
file is always the latest file and does not have an ID number. For example, if you configure
the maximum number of checkpoints as 50, after performing 50 rollback save commands,
there will be a latest rollback checkpoint file with extension *.rb, and 49 older files with
extension *.rb.1 to *.rb.49.
The no form of this command resets the maximum value to the default.
Default 10
Parameters number — the maximum number of rollback checkpoint files
Values 1 to 200
rescue-location
Syntax [no] rescue-location file-url | rescue filename
Context config>system>rollback
Description This command configures the location and generic filename of the rollback rescue
configuration file.
A rescue file can be saved locally on the compact flash or on a remote device. The file URL
must not include a filename extension. The suffix for the rollback rescue configuration file is
*.rc and is automatically appended when the file is saved.
A valid rollback rescue location must be configured before a rollback save command is
executed.
Default no rescue-location
Parameters file-url — the local or remote file path for the rollback rescue configuration file
Values
local-url [cflash-id/][file-path] 200 chars max, including cflash-id
directory length 99 chars max each
remote-url [{ftp://}login:pswd@ remote-locn/][file-path]
255 chars max directory length 99 chars max each
To Next Page
Loading...
