Basic System Configuration Guide File System Management
Edition: 01 3HE 11010 AAAC TQZZA 123
force — forces an immediate move of the specified files
file move force executes the command without displaying a user prompt
message
rd
Syntax rd file-url rf
rd file-url [force]
Context file
Description This command removes (deletes) a directory in a file system.
If the directory is empty, the rd command is used to remove it. The force option executes the
command without prompting the user to confirm the action.
If the directory contains files and/or subdirectories, the rf parameter must be used to remove
the directory.
Parameters file-url — the directory to be removed (see Table 14 for parameter descriptions)
rf — forces a recursive delete (directory and its subdirectories/files)
force — forces an immediate deletion of the specified directory; no user prompt is
displayed
repair
Syntax repair [flash-id]
Context file
Description This command checks a compact flash device for errors and repairs any errors found.
Parameters cflash-id — the compact flash slot ID to be shut down or enabled. When a specific cflash-
id is specified, then that drive is shut down. If no cflash-id is specified, the drive
referred to by the current working directory is assumed. If a slot number is not
specified, then the active CSM is assumed.
Values see Table 14 for parameter descriptions and values
Default the current compact flash device
To Next Page
Loading...
