File System Management
126
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
State: admin = down, operational = down, equipped = no
No compact flash present, drive enabled: If no compact flash is present and the drive is
not shut down, the LED is unlit.
State: admin = up, operational = down, equipped = no
Ejecting a compact flash: The compact flash drive should be shut down before ejecting a
compact flash. The LED should turn to solid (not blinking) amber. This is the only way to
safely remove the compact flash. If a compact flash drive is not shut down before a compact
flash is ejected, the LED blinks amber for approximately 5 s before shutting off.
State: admin = down, operational = down, equipped = yes
The shutdown or no shutdown state is not saved in the configuration file. Following a
reboot, all compact flash drives are in their default state.
Default no shutdown — compact flash device is administratively enabled
Parameters cflash-id — the compact flash slot ID to be shut down or enabled. If a cflash-id is
specified, the drive is shut down or enabled. If no cflash-id is specified, the drive
referred to by the current working directory is assumed. If a slot number is not
specified, the active CSM is assumed.
Values see Table 14 for parameter descriptions and values
active — all drives on the active CSM are shut down or enabled
standby — all drives on the standby CSM are shut down or enabled
If both active and standby keywords are specified, all drives on both CSMs are shut
down or enabled.
type
Syntax type file-url
Context file
Description This command displays the contents of a text file.
Parameters file-url — the file contents to display (see Table 14 for parameter descriptions)
To Next Page
Loading...
