Boot Options
186
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
5.13.2.1.6 DNS Configuration Commands
dns-domain
Syntax dns-domain dns-name
no dns-domain
Context bof
Description This command configures the domain name used when performing DNS address resolution.
This is a required parameter if DNS address resolution is required. Only a single domain
name can be configured. If multiple domain statements are configured, the last one
encountered is used.
The no form of the command removes the domain name from the configuration.
Default no dns-domain — no DNS domain name is configured
Parameters dns-name — the DNS domain name
primary-dns
Syntax primary-dns ip-address
no primary-dns
Context bof
Description This command configures the primary DNS server used for DNS name resolution.
DNS name resolution can be used when executing ping, traceroute, and service-ping, and
also when defining file URLs. DNS name resolution is not supported when DNS names are
embedded in configuration files.
The no form of the command removes the primary DNS server from the configuration.
Default no primary-dns — no primary DNS server is configured
Parameters ip-address — the IP address of the primary DNS server
Values ipv4-address a.b.c.d
ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
To Next Page
Loading...
