Nokia 7705 - 5.1.7 LDP FEC Statistics; 5.1.8 Multi-area and Multi-instance Extensions to LDP

Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 377
type
Syntax type {2048khz-G703 | 5mhz | 10mhz}
no type
Context config>system>sync-if-timing>external>input-interface
config>system>sync-if-timing>external>output-interface
Description This command configures the interface type of the external timing port.
The no form of the command reverts to the default.
Default 2048 kHz-G703
Parameters 2048khz-G703 — specifies G703 2048 kHz clock
5mhz — specifies a 5 mHz sine clock
10mhz — specifies a 10 mHz sine clock
output-interface
Syntax output-interface
Context config>system>sync-if-timing>external
Description This command enables the context to configure parameters for external output timing
interface via the port on the CSM.
Default n/a
ql-selection
Syntax [no] ql-selection
Context config>system>sync-if-timing
Description This command enables SSM encoding as a means of timing reference selection.
Default no ql-selection
ref-order
Syntax ref-order first second [third]
no ref-order
Context config>system>sync-if-timing