Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 385
The no form of the command reverts to the default value.
Default 4
Parameters multiplier — specifies the multiplier of the transmit interval
Values 2 to 10
tx-interval
Syntax tx-interval interval
no tx-interval
Context config>system>lldp
Description This command configures the LLDP transmit interval time.
The no form of the command reverts to the default value.
Default 30
Parameters interval — specifies the LLDP transmit interval time in seconds
Values 5 to 32768