Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 401
6.13.2.2.1 System Administration Commands
admin
Syntax admin
Context <ROOT>
Description This command enables the context to configure administrative system commands. Only
authorized users can execute the commands in the admin context.
Default n/a
debug-save
Syntax debug-save file-url
Context admin
Description This command saves existing debug configuration. Debug configurations are not preserved
in configuration saves.
Default n/a
Parameters file-url — the file URL location to save the debug configuration (see Table 14 for
parameter descriptions)
disconnect
Syntax disconnect {address ip-address | username user-name | console | telnet | ftp | ssh | mct}
Context admin
Description This command disconnects a user from a console, Telnet, FTP, SSH, SFTP, or MPT craft
terminal (MCT) session.
If any of the console, Telnet, FTP, SSH, or MCT options are specified, then only the
respective sessions are affected. The ssh keyword disconnects users connected to the node
via SSH or SFTP.
If no console, Telnet, FTP, SSH, or MCT options are specified, then all sessions from the IP
address or from the specified user are disconnected.
Any task that the user is executing is terminated. FTP files accessed by the user will not be
removed. A major severity security log event is created, specifying what was terminated and
by whom.
To Next Page
Loading...
