Nokia 7705 - Page 402

System Management
402
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
Default n/a — no disconnect options are configured
Parameters ip-address — the IP address to disconnect
Values ip-int-name: 32 characters maximum
ipv4-address: a.b.c.d
ipv6-address: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
user-name — the name of the user
console — disconnects the console session
telnet — disconnects the Telnet session
ftp — disconnects the FTP session
ssh — disconnects the SSH or SFTP session
mct — disconnects the MCT session
display-config
Syntax display-config [detail | index]
Context admin
Description This command displays the system’s running configuration.
By default, only non-default settings are displayed.
Specifying the detail option displays all default and non-default configuration parameters.
Parameters detail — displays default and non-default configuration parameters
index — displays only persistent indexes
reboot
Syntax reboot [active | standby] | [upgrade] [now]
Context admin
Description This command reboots the router including redundant CSMs or upgrades the boot ROMs.
If no options are specified, the user is prompted to confirm the reboot operation. For example:
ALU-1>admin# reboot
Are you sure you want to reboot (y/n)?