Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 429
2/1/3 NB 57:37:ff:00:00:00 1 2/2/2, int* ALU-3
-------------------------------------------------------------------------------
Number of neighbors: 6
A:ALU-1#
load-balancing-alg
Syntax load-balancing-alg [detail]
Context show>system
Description This command displays the system load-balancing settings.
Parameters detail — displays detailed information for load-balancing algorithms
Output The following output is an example of system load-balancing algorithm information, and
Table 41 describes the fields.
Table 40 Show LLDP Neighbor Output Fields
Label Description
Lcl Port The physical port ID of the local port in slot/mda/port format
Scope The scope of LLDP supported: NB (nearest bridge), NTPMR
(nearest non-two-port MAC relay bridge), or NC (nearest
customer bridge)
Remote Chassis ID The MAC address of the chassis containing the Ethernet port
that sent the LLDPDU
Index The local interface index (ifindex)
Remote Port The physical port ID of the remote port in slot/mda/port format
and a port description (based on ifDescr from RFC 2863 - IF
MIB)
If a port-description TLV is received, displays the ifDescr object
for the interface – a text string containing information about the
interface
If a port-description TLV is not received or the value is null,
displays the ifindex for the interface
(* indicates that the output has been truncated)
Remote System Name The name of the remote chassis
To Next Page
Loading...
