Basic System Configuration Guide System Management 
Edition: 01 3HE 11010 AAAC TQZZA 447
 
Output Example
A:# show system ptp clock 2 timestamp
===============================================================================
Timestamp Correction Summary
-------------------------------------------------------------------------------
Phys In/ Sync Delay Req
Port Out Pkt Pkt
===============================================================================
1/1/1 in 132941544 0
out 0 132901419
1/1/2 in 216682263 0
out 0 10465790
1/1/3 in 0 0
out 0 0
1/1/4 in 0 0
out 0 0
1/1/5 in 0 0
out 0 0
1/1/6 in 0 0
out 0 0
1/1/7 in 0 0
out 0 0
1/1/8 in 0 0
out 0 0
1/1/9 in 0 0
out 0 0
1/1/10 in 0 0
out 0 0
1/1/11 in 0 0
out 0 0
1/1/12 in 0 0
out 0 0
Port State The PTP port state: initializing, listening, uncalibrated, slave, 
master, or passive
Dyn/Stat Indicates whether the peer is statically configured or dynamically 
configured
In/Out The direction of the packet count
Anno The number of ingress or egress announce packets
Sync The number of ingress or egress synchronization packets
Delay Req/Resp The number of ingress or egress delay request or delay response 
packets
Table 47 Show System PTP Clock Output Fields  (Continued)
Label Description