System Management
458
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
sntp
Syntax sntp
Context show>system
Description This command displays SNTP protocol configuration and state.
Output The following output is an example of SNTP information, and Table 52 describes the fields.
Output Example
A:ALU-1# show system sntp
===============================================================================
SNTP Status
===============================================================================
Admin Status : up Oper Status : up Mode : unicast
===============================================================================
===============================================================================
SNTP
Servers
===============================================================================
SNTP Server Version Preference Interval
-------------------------------------------------------------------------------
Last Save Result The status of the last rollback checkpoint save
Last Save Completion
Time
The date and time the last rollback rescue file save operation was
completed
Revert
In Progress Indicates if a system rollback reversion is in progress
Last Revert Initiated
User
The username of the person who initiated the last system rollback
reversion
Last Revert Result The result of the last system rollback reversion
Last Revert Initiated
Time
The date and time when the last rollback was initiated
Last Revert
Completion Time
The date and time when the last rollback was completed
Delete
Last Delete Result The status of the last rollback rescue file deletion
Table 51 Show System Rollback Output Fields (Continued)
Label Description
To Next Page
Loading...
