Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 459
10.10.20.253 3 Preferred 64
===============================================================================
A:ALU-1#
thresholds
Syntax thresholds
Context show>system
Description This command display system monitoring thresholds.
Output The following output is an example of system monitoring thresholds information, and
Table 53 describes the fields.
Output Example
A:ALU-48# show system thresholds
================================================================
Threshold Alarms
================================================================
Variable: tmnxCpmFlashUsed.1.11.1
Alarm Id : 1 Last Value : 835
Rising Event Id : 1 Threshold : 5000
Falling Event Id : 2 Threshold : 2500
Table 52 Show System SNTP Output Fields
Label Description
Admin Status up — the SNTP server is administratively up
down — the SNTP server is administratively down
Oper Status up — the SNTP server is operationally up
down — the SNTP server is operationally down
Mode broadcast — the SNTP server has broadcast client mode enabled
unicast — the SNTP server has unicast client mode enabled
SNTP Server The SNTP server address for SNTP unicast client mode
Version The SNTP version number, expressed as an integer
Preference Normal — when more than one time server is configured, one
server can be configured to have preference over another
Preferred — indicates that this server has preference over
another
Interval The frequency, in seconds, that the server is queried
To Next Page
Loading...
