Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 465
time
Syntax time
Context show
Description This command displays the current day, date, time and time zone.
The time is displayed either in the local time zone or in UTC depending on the setting of the
root level time-display command for the console session.
Output The following output is an example of time information.
Output Example
A:ALU-1# show time
Tue Mar 25 12:17:15 GMT 2008
A:ALU-1#
----------------------------------
Selected true — the source is being used to update system time
false — the source is not being used to update system time
Qualified true — the time reference is providing time updates
false — the time reference is not providing time updates
Leap Sec Sched Indicates whether there is a scheduled leap second
Leap Sec Upd Time The UTC time when the scheduled leap second adjustment will
occur. If a leap second is not scheduled, the value will be 0.
Time of Day - 1 Pulse Per Second Port
Output The state of the output: shutdown or no shutdown
Message Type The type of message: ct, cm, or none
Format The format of the time of day output
Modulation The modulation type of the time of day output
Freq/Resolution The frequency (in kHz) and resolution (in milliseconds) of the
time of day output
Coded Expression The coded expression of the time of day output
Table 55 Show System Time Output Field (GNSS and PTP Time Source)
Label Description
To Next Page
Loading...
