Nokia 7705 - Page 466

System Management
466
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
redundancy
Syntax redundancy
Context show
Description This command enables the context to show redundancy information.
multi-chassis
Syntax multi-chassis
Context show>redundancy
Description This command enables the context to show multi-chassis redundancy information.
all
Syntax all
Context show>redundancy>multi-chassis
Description This command displays summary multi-chassis redundancy status information.
Output The following output is an example of general chassis information, and Table 56 describes
the fields.
Output Example
A:7705:Dut-D>config>redundancy>multi-chassis# show redundancy multi-chassis all
===============================================================================
Multi-Chassis Peers
===============================================================================
Peer IP Src IP Auth Peer Admin MC-Ring Oper MC-EP Adm
MCS Admin MCS Oper MCS State MC-LAG Adm MC-LAG Oper
-------------------------------------------------------------------------------
10.10.10.3 10.10.10.4 None Enabled unknown --
-- -- -- Enabled Enabled
===============================================================================
Table 56 Show Multi-Chassis Output Fields
Label Description
Peer IP Displays the multi-chassis redundancy peer IP address
Src IP Displays the source IP address used to communicate with the
multi-chassis peer