Nokia 7705 - Page 474

To Next Page

To Previous Page

System Management

474

Basic System Configuration Guide

3HE 11010 AAAC TQZZA Edition: 01

Reference Order bits, ref1, ref2 — the priority order of the timing references

Reference Input 1, 2 The reference 1 and reference 2 input parameters

Admin Status down — the ref1 or ref2 configuration is administratively

shut down

up — the ref1 or ref2 configuration is administratively

enabled

Configured Quality Level Synchronization Status Messaging quality level value

manually configured on port for ref1 or ref2

Rx Quality Level Synchronization Status Messaging quality level value

received on port for ref1 or ref2

Qualified for Use Whether the ref1 or ref2 timing reference is qualified for

use by the synchronous timing subsystem

Selected for Use Whether the ref1 or ref2 timing reference is presently

selected

Not Selected Due To If the ref1 or ref2 timing reference is not selected, the

reason why

Not Qualified Due To If the ref1 or ref2 timing reference is not qualified, the

reason why

Source Port None — no source port is configured or in use as a ref1 or

ref2 timing reference

card/slot/port — the source port of the ref1 or ref2 timing

reference

Reference BITS 1, 2 The reference 1 and reference 2 BITS parameters,

applicable to the 7705 SAR-18 only

Admin Status down — the BITS 1 or BITS 2 configuration is

administratively shut down

up — the BITS 1 or BITS 2 configuration is administratively

enabled

Configured Quality Level Synchronization Status Messaging quality level value

manually configured on port for BITS 1 or BITS 2

Rx Quality Level Synchronization Status Messaging quality level value

received on port for BITS 1 or BITS 2

Qualified For Use Whether the BITS 1 or BITS 2 reference is qualified for use

by the synchronous timing subsystem

Table 60 Show Sync-If-Timing Output Fields (Continued)

Label Description

Other manuals for Nokia 7705