Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 475
chassis
Syntax chassis [environment | power-feed]
Context show
Description This command displays general chassis status information.
Parameters environment — displays chassis environmental status information
Default Display all chassis information.
power-feed — displays chassis power feed status information
Default Display all chassis information.
Output The following output is an example of general chassis information, and Table 61 describes
the fields.
Output Example
A:ALU-1# show chassis
===============================================================================
Chassis Information
===============================================================================
Name : ALU-1
Type : 7705 SAR-8
Location :
Selected For Use Whether the BITS 1 or BITS 2 reference is presently
selected
Not Qualified Due To If the BITS 1 or BITS 2 reference is not qualified, the
reason why
Not Selected Due To If the BITS 1 or BITS 2 reference is not selected, the
reason why
Interface Type The interface type for the BITS port
Framing The framing type used by the BITS port
Line Coding The line coding type used by the BITS port
Output Admin Status The administrative status of the BITS output port
Output Reference Selected The type of output reference selected by the BITS port
Tx Quality Level The Synchronization Status Messaging quality level value
transmitted on the BITS port
Table 60 Show Sync-If-Timing Output Fields (Continued)
Label Description
To Next Page
Loading...
