ACCESS GATEWAY
144 System Administration
Network Info Menu
Displaying ARP Table Entries {ARP}
You can display a table that shows the current status of the ARP (Address Resolution Protocol) assignments.
ARP is used to dynamically bind a high level IP address to a low level physical hardware (MAC) address.
ARP is limited to a single physical network that supports hardware broadcasting.
To view the ARP Table, go to the Web Management Interface, click on
Network Info, then click on ARP.
The ARP Table screen appears:
Displaying DAT Sessions {DAT}
Dynamic Address Translation (DAT) allows all users to obtain network access, regardless of their computer’s
network settings.
To view the DAT Session Table, go to the Web Management Interface, click on Network Info, then click on
DAT. The DAT Session Table screen appears:
Click on the Delete all sessions button to clear all current subscriber sessions.
Deleting DAT sessions will cause all misconfigured subscribers to lose their
Internet connection for a short time.
Displaying the Host Table {Hosts}
You can display a table which lists the hosts that are currently configured. This table includes the assigned
host names, their corresponding IP addresses, and any aliases that may be assigned to each host. Hosts provide
services to other computers that are linked to it by a network.
To Next Page
