ACCESS GATEWAY
118 System Administration
numeric value only (no characters or delimiters). The numbers must be entered in the form of a
“telephone number” which the selected PMS will interpret.
If the “phone number” field required by the PMS is shorter than 15 characters, only the
first required number of characters will be supplied.
13.
If desired, enable Syslog PMS communications.
14.
Click Save to save your changes and restart the serial interface, or click Restore if you want to reset all
the values to their previous state.
Based on the HOBIC interface standards, Nomadix, Inc. has also certified interoperability
with a number of other PMS and call accounting solutions such as Ramesys’ ImagInn,
Xeta Virtual XL, and Hilton’s proprietary standard OnQ. This development effort is on-
going. For an up-to-date list of supported PMS systems, please contact our Technical
Support team. Refer to Appendix A: Technical Support on page 267.
Setting Up Port Locations {Port-Location}
Port-Location allows you to establish the mode of operation for devices.
1.
From the Web Management Interface, click on Configuration, then Port-Location. The Port-Location
Settings screen appears:
To Next Page
