ACCESS GATEWAY
Installing the Access Gateway 45
PLEASE READ THE NOMADIX END USER LICENSE AGREEMENT ('AGREEMENT')
INCLUDED WITH THE NOMADIX PRODUCT.
BY USING THIS SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF THE
AGREEMENT. I AGREE TO THE TERMS AND CONDITIONS OF THE NOMADIX END
USER LICENSE AGREEMENT.
(Y)ES (N)O
y
The system will now try to contact the Nomadix License Key Server.
Please wait...
Received key from License Key Server.
If the license key is successfully processed the unit will reboot...
Figure 9: License key retrieval
NOTE: The date and time Software License Subscription start date.
Step 4: Configuring the System
You have now established a basic configuration for the AG that enables internet connectivity.
Before you can log into the AG and use the graphical Web Management Interface (WMI), you must disable
subscriber-side HTTP:
1.
Log in to the AG
2.
Navigate to Configuration -> Access Control -> Interface
3.
Press Enter until you reach Subscriber-side HTTP
4.
Enter disabled
You can now use the graphical Web Management Interface (WMI) to configure the product’s features.
Step 5: Configuring AG DHCP Server Settings
DHCP Server is enabled by default. To configure the DHCP Server, go to DHCP under the Configuration
menu. You can either modify the default DHCP pool or delete/add another DHCP pool. The total lease pool
size recommendation is 5 times more than the number of licensed subscribers
DHCP Parameter Your Settings Default Values
DHCP Services (Disable) no
DHCP Relay (Yes / No)
If No, skip to DHCP Server
no
DHCP Relay Server IP Address blank
DHCP Relay Agent IP Address blank
DHCP Server (Yes / No)
Only if the DHCP Relay is disabled
yes
DHCP Server IP Address 10. 0. 0.4
To Next Page
Loading...
