ACCESS GATEWAY
System Administration 189
2.
Enter the definitions you want for each label in the corresponding fields.
3.
Click Save to save your changes, or click Clear Changes if you want to reset all the values to their
previous state.
If you want to reset all field values to their default state, click
Restore Defaults.
Defining Subscriber Error Messages {Subscriber Errors}
This procedure allows you to define how error messages are displayed to subscribers.
There are 2 (two) pages of error messages available.
1.
From the Web Management Interface, click on Subscriber Interface, then Subscriber Errors, 1 of 2.
The Subscriber Page -- Error Message Definitions, 1 of 2 screen appears:
To Next Page
Loading...
