ACCESS GATEWAY
62 Installing the Access Gateway
Installing the Nomadix Private MIB
The Nomadix Private Management Information Base (MIB) allows you to view and manage SNMP objects
on your Access Gateway. To use the MIB, you must obtain the appropriate nomadix.mib file for your Access
Gateway. This file is available in the Support area of the Nomadix web site.
Obtaining the Management Information Base (MIB) file
1.
Visit www.nomadix.com/support.
2.
Scroll to “Gateway Documentation”.
3.
Click “Latest Documentation”
4.
Scroll to the group for your Access Gateway model.
5.
Click the link to download the MIB file for your Access Gateway.
Configuring the Management Information Base
1.
Import the nomadix.mib file into your SNMP client manager.
2.
Connect to the Access Gateway from a node on the network that is accessible via the
Access
Gateway’s network port (Internet, LAN, etc.). Be sure to enable the SNMP daemon on the Access
Gateway (available on the Access Gateway’s CLI or Web Management Interface, under the
Configuration menu –
snmp).
3.
All variables defined by Nomadix start with the following prefix:
iso.org.dod.internet.private.enterprises.nomadix
4.
You should now be able to define queries and set the SNMP values on your
Access
Gateway. If necessary, consult this User Guide or your SNMP client
manager’s documentation for further details.
We recommend that you change the predefined community strings in order to maintain a
secure environment for your Access Gateway.
Click to download the
MIB file.
To Next Page
Loading...
