ACCESS GATEWAY
152 System Administration
1. From the Web Management Interface, click on Port-Location, then Add. The Add Port- Location
Assignments screen appears:
2. Enter a location identifier in the Location field. Locations can be assigned as an alpha, numeric, or alpha-
numeric value unless a PMS interface is used (see note).
If you are using a PMS interface, ensure that the “Location” field consists only of
numbers (no alpha characters or symbols).
All alpha characters (used for locations and descriptions) are case-sensitive.
3. In the Port field, enter the port (the VLAN ID when using 802.1Q 2-way).
4. In the Description field, enter a meaningful description for this port-location assignment.
5. “Provide DHCP Service” is selected by default. De-select this option if you wish to disable subscriber-
side DHCP for this port location. See Managing the DHCP service options {DHCP} on page 88.
6. Enter a Subnet for the port assignment you are adding.
To Next Page
