ACCESS GATEWAY
218 Quick Reference Guide
Item Description
Class-Based Queueing Define multiple groups (classes) of users, to support priority and guaranteed
minimum bandwidth on a per-group basis
Clustering Automatically distribute subscribers across gateways.
Destination HTTP
Redirection
Configure redirection of HTTP requests to one or more portal page URLs.
DHCP Assigns the Nomadix Access Gateway as its own DHCP server, or enables the DHCP
relay for an external server.
DNS Sets up the DNS parameters, including the host name, domain, and the primary and
secondary DNS servers.
Dynamic DNS Sets parameters for Dynamic DNS.
Fast Forwarding Enable Fast Forwarding mode for improved throughput.
GRE Tunneling Sets GRE Tunneling parameters.
Home Page Redirect Redirects the subscriber’s browser to a specified home page.
iNAT™ Enables Intelligent Address Translation for Transparent VPN Access.
Interface Monitoring The ability to actively monitor each WAN/ISP/ and VLAN connection to assure that
full network functionality exists
IPSec IPsec is an end-to-end security scheme operating in the Internet Layer of the
Internet Protocol Suite. It can be used in protecting data flows between a pair of
hosts (host-to-host), between a pair of security gateways (network-to-network), or
between a security gateway and a host (network-to-host). Can be used in the
transport layer or used to create a secure tunnel
IPv6 Allows direct network management through IPv6
Load Balancing Ensures that demands placed on high-speed Internet access (HSIA) are balanced
based on the capability of each WAN/ISP connection.
Location Sets up your location and IP addresses for the network, subscriber, subnet mask,
and default gateway.
Logging Enables logging options for the system and AAA functions.
MAC Authentication Enables MAC authentication, retry frequency, MAC address format, MAC address
hex-alpha case, and RADIUS service profile.
Passthrough Addresses Establishes IP pass-through addresses (up to 300).
PMS Enables one of the listed PMS options, or allows you to disable the PMS feature.
Port-Location Establishes the Access Concentrator settings.
QoS Configure mode and polices for Quality of Service metrics.
RADIUS Client Set up the RADIUS client.
To Next Page
