ACCESS GATEWAY
Quick Reference Guide 261
<DATE>max 10 characters </DATE>
<TIME>max 8 characters</TIME>
<ROOM_NUM>max 20 characters</ROOM_NUM>
<AMOUNT>max 10 characters</AMOUNT>
<TRANS_TYPE>max 5 characters </TRANS_TYPE>
</USG>
Format for each field:
REC_NUM:00923 (numbers only, no alpha characters)
Access Gateway_ID:00020b
PROPERTY_ID:Any regular string
DATE:03/30/2001 (mm/dd/yyyy)
TIME:23:41:38 (24 hour format)
ROOM_NUM:Any regular string
AMOUNT:234.34
TRANS_TYPE:CC
RESULT_VALUE:OK or ERROR
IP:Standard IP address format (123.123.123.123)
The packet after the HTTP headers added looks like this:
XML to Access Gateway
The Access Gateway accepts a single line of XML text in the specified format. The XML string is a command
sent by the External Server to the Access Gateway product. In this case, the acknowledgement received from
the External Server forms the command. The Access Gateway expects the acknowledgement in the following
format:
External Server to Access Gateway:
<USG COMMAND="RMTLOG_ACK">
<ACK_VALUE>RESULT_VALUE</ACK_VALUE>
To Next Page
