SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
ProBlue Flex OEM User’s Guide
95
Part 1129255_01
E 2020 Nordson Corporation
Restoring a Melter to the Factory Default Settings
You can restore a melter's factory default settings by creating a new .NOR
file on BBconn Cloud and then transferring the new file to a melter.
1. Log into your BBconn Cloud account.
S Select SETUP TOOL - , and select CREATE a .NOR file.
2. Insert a USB drive into your computer.
3. Select Download NOR File at the bottom left of the screen. When the
Save File window opens, navigate to the desired file location or to the
USB drive to save the file.
Figure 6 Downloading a .NOR file from a System Settings screen (Temperature
Settings screen shown)
4. Upload the .NOR file to the melter you want to restore to the factory
default settings. Refer to Restoring Saved Melter Settings earlier in this
section.
To Next Page
Loading...
