SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
NETWORKING
SYSTEM SETTINGS
ProBlue Flex OEM User’s Guide
76
Part 1129255_01
E 2020 Nordson Corporation
Defining PLC Access
1. Log into your BBconn Cloud account, then do the following:
S Select SETUP TOOL - create or load a .NOR file.
S Select SYSTEM SETTINGS | NETWORKING.
2. Select PLC.
3. Do the following to define to set up your PLC communications:
Option Description Default Notes
PLC
Access
Enable/Disable full
read/write
communication
access between
the melter and your
PLC.
Enabled
S Enable provides full
read/write access.
S Disable prevents all
read/write access.
PLC
Access
Read Only
Enable/Disable full
read only
communication
access between
the melter and your
PLC.
S Enable provides
only full read access
if PLC Access is
Enabled.
S Disable provides
read/write access if
PLC Access is
Enabled.
PLC I/O
Data
Decide which PLC
data process you
want to use - Index,
Full Map (legacy) or
the new Flexible
Map.
Flex
map
Import/
Export
Flexible
Map
Decide whether to
Import a flexible
map configuration
file that was
created using
BBconn Cloud into
this melter or export
the .PLC file to a
USB to either
update the
configuration in
BBconn Cloud or to
import this PLC file
into another similar
unit.
S You must use
BBconn Cloud to
generate a
configuration
(flexible map) map
file - .PLC file.
S The default PLC
name is
Myflexcfg.plc.
S You cannot rename
this file.
S From BBconn
Cloud, save file to
the \PLC folder on
the USB drive. If the
folder does not exist,
you must first create
it.
To Next Page
Loading...
