Nordson ProBlue Flex - Input Parameters

SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
USER MANAGEMENT
SYSTEM SETTINGS
SETUP TOOL
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
HEAT SCHEDULE
SYSTEM SETTINGS
LOAD FROM COMPUTER
ProBlue Flex OEM User’s Guide
71
Part 1129255_01
E 2020 Nordson Corporation
Modifying User Management Access Rights
Refer to the manual that came with your control system. Not all Nordson
products or platforms support User Management.
1. Log into your BBconn Cloud account, then do the following:
S Select SETUP TOOL - create or load a .NOR file.
S Select SYSTEM SETTINGS | USER MANAGEMENT.
2. Decide which privilege, Operator or Technician, that you want to grant to
users. Unsecured indicates no security is applied to those tasks.
3. When done, select SAVE.
Defining and Modifying Heat Schedules
Use the Heat Schedule to set up a daily or weekly schedule to automatically
switch the heaters On or Off and to automatically enter and exit Setback.
1. Log into your BBconn Cloud account, then do the following:
S Select SETUP TOOL - create or load a .NOR file.
S Select SYSTEM SETTINGS | HEAT SCHEDULE.
2. Press the
to toggle (enable or disable) the Heat Schedule option.
The default is Disabled.
3. Select Add a Heat Event, then do the following:
S Select the day or days that you want to define the Heat event.
S Select the Heaters On Time and Heaters Off Time.
S When done, select ADD EVENT. The graph updates, displaying the
Heat event in green for the day or days you selected.
4. Select Add a Setback Event, then do the following:
S Select the day or days that you want to define the Setback event.
S Select the Enter Setback Time and Exit Setback Time. A Setback
Event must be contained within a Heat On/Off Event.
S When done, select ADD EVENT. The graph updates, displaying the
Setback event in Blue within the Heat Event for the day or days you
selected.
5. When done, select SAVE.