ProBlue Flex OEM User’s Guide
13
Part 1129255_01
E 2020 Nordson Corporation
Where to Find Information
Getting your melter into operation is a 2-step process:
Step Refer to… Description
1 Product installation manual
S Install and connect power to the melter.
S Connect your melter to a PLC.
S Runtime, system settings, and troubleshooting
instructions for your specific control system
Note: You can skip this step if you are using the optional
remote touch screen, and you do not plan on making use
of a PLC to view and monitor real-time melter information.
2
BBconn Cloud Manual, part
number 1129243 manual
S Register and setup a BBconn Cloud account.
S Optional - PLC integration
S Exporting settings from BBconn Cloud to your melter
S Loading and Managing Recipes
S Viewing the Event Log
S Modifying User Management Access Rights
S Defining and Modifying Heat Schedules
S Defining Network and PLC Communications Setup
The rest of this manual details the tasks listed in Step 1.
To Next Page
Loading...
