Nordson ProBlue Flex - Output Parameters

SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
SHIFTSCHEDULE
SYSTEM SETTINGS
ProBlue Flex OEM User’s Guide
72
Part 1129255_01
E 2020 Nordson Corporation
NOTES:
S Click on the Green (heat Schedule) or Blue (Setback) area to modify the
event time.
S Maximum number of event pairs is 6. You must enter an on/off time for
each Heat or Setback Event.
S Heat and Setback Events cannot overlap each other.
S A Setback Event must be contained within a Heat On/Off Event.
S You can have multiple Setback Events within a single Heat Event.
S If you remove a Heat Event, then all Setback Events contained within that
Heat Event are automatically deleted as well.
S Heat or Setback Events cannot cross into the next day.
Defining and Modifying Shift Schedules
Use Shifts to sort and filter production data reports based on a day, and more
specifically, the hours of production. You can define up to five shifts per day.
1. Log into your BBconn Cloud account, then do the following:
S Select SETUP TOOL - create or load a .NOR file.
S Select SYSTEM SETTINGS | SHIFT SCHEDULE.
2. Press the
to toggle (enable or disable) the Shift option. The default
is Disabled.
3. Select Add Shift, then do the following:
S Select the day or days that you want to define for the shift.
S For each shift, enter the starting (or From) time and the ending (or To)
time.
S When done, select ADD Shift. The graph updates, displaying the
starting and ending time for each defined shift.
4. When done, select SAVE.
NOTES:
S Click on a colored area representing a shift to modify it.
S You can have a maximum of five shifts.
S Shift schedules cannot overlap each other.
S If you remove a Shift schedule, then all shift settings (day or days of week
as well as Beginning/Ending times) are automatically deleted.
S Heat or Setback Events cannot cross into the next day.