Nordson ProBlue Flex - Monitoring the Tank Adhesive Level

ProBlue Flex OEM User’s Guide
24
Part 1129255_01
E 2020 Nordson Corporation
Monitoring the Tank Adhesive Level
The melter has a built-in sensor in the tank.
S You can purchase the optional Light Tower Kit (part number 1129090) to
get a visual and/or audible horn notification using an available output.
S With the optional touch screen, if you have a Melt-on-Demand system, or
a tank with an optional Fill system, then from the touch screen Home
screen, the Fill Level is displayed. Otherwise, the Tank Level is
displayed as percent.