SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
FLOW
SYSTEM SETTINGS
ProBlue Flex OEM User’s Guide
57
Part 1129255_01
E 2020 Nordson Corporation
Trigger Settings
1. Log into your BBconn Cloud account, then do the following:
S Select SETUP TOOL - create or load a .NOR file.
S Select SYSTEM SETTINGS | FLOW.
2. From the Trigger Settings section, enter the following information.
When done, select SAVE.
Setting Description Default
Trigger Polarity Sets the polarity for correct product trigger operation. Use Light On for
normally open triggers, Dark On for normally closed triggers.
Dark
On
Trigger Type Refer to the documentation that came with your trigger for this information.
This is also known as Trigger Sourcing.
PNP
Capture Mode Upon detecting the leading edge of a product, the falling edge can be either
the beginning of the next product (Start-to-Start) or the end of the current
product (Start-to-End).
Start-to-
Start
To Next Page
Loading...
