SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
TOOLS
MAINTENANCE SCHEDULE
SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
TOOLS
MAINTENANCE SCHEDULE
ProBlue Flex OEM User’s Guide
90
Part 1129255_01
E 2020 Nordson Corporation
Setting Up and Viewing Component Maintenance Status
1. From BBconn Cloud, do the following:
S SETUP TOOL - create or load a .NOR file.
S TOOLS, then select MAINTENANCE SCHEDULE.
2. Select View Maintenance Status.
3. Select the
icon of a maintenance component item and select Edit
Settings to do the following:
S Enable or disable maintenance reminder for this one component.
S Change the displayable Title.
S Change the default Interval and Snooze hours.
S If you performed the maintenance, then reset the reminder by
updating the Start On date and time.
S Include Service Notes that you want to include with this service
reminder.
S Select DELETE if you no longer want the melter to monitor
maintenance for this component.
4. When done, select UPDATE.
NOTE:
S The icon appears next to a maintenance component indicates
that maintenance is past due.
Viewing Component Maintenance History
1. From BBconn Cloud, do the following:
S SETUP TOOL - create or load a .NOR file.
S TOOLS, then select MAINTENANCE SCHEDULE.
2. Select VIEW MAINTENANCE HISTORY to view the maintenance history
for this melter.
To Next Page
Loading...
