ProBlue Flex OEM User’s Guide
1
Part 1129255_01
E 2020 Nordson Corporation
Overview
This manual provides information specific to the ProBlue Flex adhesive
melter with an Original Equipment Manufacturer (OEM) user interface. The
OEM interface is selected when the primary control of the melter is through
communication with a Programmable Logic Controller (PLC).
ProBlue Flex melters with an OEM interface are set up using the PLC
mapping capability of BBconn Cloud, a web application that runs in a
browser on any desktop computer or handheld device. This manual also
includes detailed procedures for using BBconn Cloud for any melter, as well
as for the PLC mapping and setup of OEM melters.
All ProBlue Flex melters include the Ethernet/IP and PROFINET
communication protocols. Other protocols can be used by installing a
compact communication card.
Applicability of this Manual
This manual provides procedures for the following tasks:
S Connecting an Ethernet cable to an OEM melter
S Performing basic operating tasks specific to OEM melters
S Using BBconn Cloud
S Performing advanced tasks specific to OEM melters (including PLC
integration)
S Troubleshooting specific to OEM melters
For all other information about the ProBlue Flex melter - including installation,
operation, maintenance, troubleshooting, parts, and technical data, refer to
the ProBlue Flex Core Customer Product Manual (P/N 1128350).
Instructions for servicing or replacing melter components are provided with
the melter service kits.
To Next Page
Loading...
