Nordson ProBlue Flex - Section 5 Maintenance

SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
TOOLS
MAINTENANCE SCHEDULE
ProBlue Flex OEM User’s Guide
89
Part 1129255_01
E 2020 Nordson Corporation
Managing the Maintenance System
1. From BBconn Cloud, do the following:
S SETUP TOOL - create or load a .NOR file.
S TOOLS, then select MAINTENANCE SCHEDULE.
2. Press the
to toggle (enable or disable) the Maintenance System
option. The default is Enabled.
3. When done, select SAVE.
NOTE: Refer to the table on the previous page to review what the
maintenance system monitors.