SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
FLOW
SYSTEM SETTINGS
ProBlue Flex OEM User’s Guide
53
Part 1129255_01
E 2020 Nordson Corporation
Enabling Flow Monitoring
You must have the Adhesive Tracking System option enabled before you can
define and make use of the flow feature.
1. Log into your BBconn Cloud account, then do the following:
S Select SETUP TOOL - create or load a .NOR file.
S Select SYSTEM SETTINGS | FLOW.
2. Press the
to toggle (enable or disable) the Alert (Monitor Alarm
Settings) option. The default is Enabled.
To Next Page
Loading...
