Nordson ProBlue Flex - Master Controls

SETUP TOOL
LOAD FROM USB/COMPUTER
USE PREVIOUS FILE
CREATE NEW
Please select how to load a configuration file
PLC COMMUNICATIONS
COMMUNCATION SET
TINGS
ProBlue Flex OEM User’s Guide
84
Part 1129255_01
E 2020 Nordson Corporation
Editing a .PLC File from BBconn Cloud
1. Log into your BBconn Cloud account, then do the following:
S Select SETUP TOOL - create or load a .NOR file.
S Select SYSTEM SETTINGS | PLC COMMUNICATIONS.
2. Refer to the BBconn Cloud manual, part number 1129243, for detailed
instructions for generating a .PLC file.
NOTE:
S When transferring files between the melter and BBconn Cloud, the
USB drive must be formatted using FAT or FAT32. No other format,
such as NTFS and exFAT are supported.