ProBlue Flex OEM User’s Guide
6
Part 1129255_01
E 2020 Nordson Corporation
Operating Practices
S Familiarize yourself with the location and operation of all safety devices
and indicators.
S Confirm that the equipment, including all safety devices (guards,
interlocks, etc.), is in good working order and that the required
environmental conditions exist.
S Use the Personal Protective Equipment (PPE) specified for each task.
Refer to Equipment Safety Information or the material manufacturer's
instructions and SDS for PPE requirements.
S Do not use equipment that is malfunctioning or shows signs of a potential
malfunction.
Maintenance and Repair Practices
S Allow only personnel with appropriate training and experience to operate
or service the equipment.
S Perform scheduled maintenance activities at the intervals described in
this document.
S Relieve system hydraulic and pneumatic pressure before servicing the
equipment.
S De‐energize the equipment and all auxiliary devices before servicing the
equipment.
S Use only new Nordson‐authorized refurbished or replacement parts.
S Read and comply with the manufacturer's instructions and the SDS
supplied with equipment cleaning compounds.
NOTE: SDSs for cleaning compounds that are sold by Nordson are
available at www.nordson.com or by calling your Nordson representative.
S Confirm the correct operation of all safety devices before placing the
equipment back into operation.
S Dispose of waste cleaning compounds and residual process materials
according to governing regulations. Refer to the applicable SDS or
contact the authority having jurisdiction for information.
S Keep equipment safety warning labels clean. Replace worn or damaged
labels.
To Next Page
Loading...
