Nordson ProBlue Flex - Section 4 Basic Melter Operation; Operator Level Tasks

ProBlue Flex OEM User’s Guide
75
Part 1129255_01
E 2020 Nordson Corporation
4. Enter or select the WiFi settings you want to use:
Option Description Default Minimum Maximum
Number of
Clients
Number of WiFi
users you want to
grant access to the
melter at any one
time
2 1 4
Channel The channel that
corresponds to the
frequency of the
WiFi you are using
6 1 11
SSID The broadcast
name
myNord
sonAP
1 character 32
characters
Security
Mode
Type of security, if
any, you want to
use
WPA
/PSK
Select Open if you do not
want to restrict network
access to this melter.
Password Enter password Nordson
2018112
0173659
8
characters
63
characters
WiFi On Enable/Disable the
WiFi module
entirely
Enabled The WiFi Indicator
displays the following.
S On when at least
one person is
currently connected
S Off when WiFi is
either not installed or
installed, but
disabled
S Flashing when
enabled, but nobody
is connected
SSID
Broadcast
On
Enable/Disable
whether the WiFi
module broadcasts
its SSID or not
when module is
turned on.
Enabled The WiFi Indicator
displays the following.
S On when at least
one person is
currently connected
S Off when WiFi is
either not installed or
installed, but
disabled
S Flashing when
enabled, but nobody
is connected
5. When done, select SAVE.