Glossary
D-9
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
Machine Enable
A control unit is enabled by a signal from the parent machine. In Nordson
literature the enable feature is also referred to as Parent Machine Interlock
or Security.
Master-Slave
The setup of two or more units in which one assumes control of one or more
slaves.
Example: Nordson melters on the PROFIBUS are slaves that are controlled
by the customer’s master.
Material
General Nordson term for application materials such as thermoplastic hot
melt adhesives, adhesives, sealants, cold glue, etc.
Melter
Melts and feeds hot melt adhesives or similar materials.
Menu
Branched program structure from which the operator selects the desired
functions/features.
min
−1
min
−1
= 1/min. Revolutions per minute (rpm).
MSDS
Material Safety Data Sheet.
Ni 120
Abbreviation for a nickle based resistance temperature sensor. At a
temperature of 0° C (32° F), it has an electrical resistance of 120 W.
Nm
Newtonmeter, SI unit for energy and starting torque. Refer to Conversions.
To Next Page
Loading...
Need help?
General
