Operation
4-6
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
Initial Startup (contd.)
Set on Control Panel
Basic settings
Change language, if necessary (English is the default)
Tap repeatedly until the starting screen reappears.
Scroll bar
1
2
3
4
Fig. 4-5 Selecting language
Temperature setpoints (= processing temperatures)
Refer to Control Panel − Overview − / T1
Undertemperatures / overtemperatures
Refer to Control Panel − Overview − / T2
Activate/deactivate channels
Re-name temperature channels if necessary.
Refer to Control Panel − Overview − / T3
NOTE: Texts that the customer can change are not translated into the
selected local language.
Pump speed(s) in manual mode
NOTE: To prevent excessive wear, the motor/pump speed should not
continuously fall below 5 min
-1
(rpm) or continuously exceed 80 min
-1
(rpm).
Refer to Control Panel − Overview − / M1
To Next Page
Loading...
