Safety
1-6
2004 Nordson Corporation
A1EN−01−[XX−SAFE]−10
Maintenance and Repair Practices
Perform scheduled maintenance activities at the intervals described in
this document.
Relieve system hydraulic and pneumatic pressure before servicing the
equipment.
De-energize the equipment and all auxiliary devices before servicing the
equipment.
Use only new or factory-authorized refurbished replacement parts.
Read and comply with the manufacturer’s instructions and the MSDS
supplied with equipment cleaning compounds.
NOTE: MSDSs for cleaning compounds that are sold by Nordson are
available at www.nordson.com or by calling your Nordson
representative.
Confirm the correct operation of all safety devices before placing the
equipment back into operation.
Dispose of waste cleaning compounds and residual process materials
according to governing regulations. Refer to the applicable MSDS or
contact the authority having jurisdiction for information.
Keep equipment safety warning labels clean. Replace worn or
damaged labels.
To Next Page
Loading...
