Introduction
2-1
P/N 7105144G
2008 Nordson Corporation
VersaBlue_NW
Section 2
Introduction
Intended Use
Adhesive melters of the series VersaBlue may be used only to melt and
convey suitable materials, e.g. thermoplastic hot melt adhesives.
Any other use is considered to be unintended. Nordson will not be liable for
personal injury or property damage resulting from unintended use.
Intended use includes the observance of Nordson safety instructions.
Nordson recommends obtaining detailed information on the materials to be
used.
Area of Use (EMC)
In regard to electromagnetic compatibility (EMC), the melter is intended for
use in industrial applications.
Operating Restrictions
When operated in residential or commercial areas, the melter may cause
interference in other electrical units, e.g. radios.
To Next Page
Loading...
